Auxiliary equipment

We use Hongcheng vertical mill to mix dolomite for processing! We are a magnesium company. In November 2021, we ordered HLM2400 vertical mill of Guilin Hongcheng to process coal gangue and dolomite mixture. The production of 325 mesh D99 powder reaches 19.3 tons per hour. The production site is clean and tidy with low noise.

We are a manganese company. In the bidding for the harmless utilization of manganese slag solid waste project, a manganese slag deamination system (with a processing capacity of 40t/h) and two HLM slag vertical mills in Guilin Hongcheng won the bid. The manganese slag deamination system is used for electrolytic manganese slag deamination. The collected ammonia is cooled and turned into ammonia water for recovery; The rest of the electrolytic manganese slag is mixed with quicklime (5%), and then enters the HLM slag of Guilin Hongcheng, which is vertically ground to 200 mesh D90, and then calcined. After calcination, it will enter the clinker mill with other cement clinker to process to a specific surface area of 450m2/kg for concrete admixture.

We are a large paper making enterprise that ordered HLM1700 large kaolin vertical mill produced by Guilin Hongcheng, providing good development equipment for our kaolin mine. The hourly output can reach 16-18 tons, 325 meshes D97.

Mineral powder is an important cement mixture and concrete admixture, which plays an important role in the construction industry. The vertical mill of superfine mineral powder is an ideal equipment for producing and processing superfine mineral powder. Recently, the complete production line of the ultra-fine mineral powder vertical mill contracted by Guilin Hongcheng was successfully completed and put into operation. The equipment operated stably and the output reached the expectation. The fineness of the mineral powder was finer than the ordinary S95 grade and the specific surface area was larger. Our company is satisfied with this.

Our Company's 60000 ton high efficiency activated carbon project has a total investment of 560 million yuan and covers an area of 138 mu. The pulverized coal mill is purchased from Guilin Hongcheng. According to the engineer's configuration scheme, HC1700 pendulum mill is used. At present, it has been put into operation to produce 200 meshes of pulverized coal, reaching the D90 pass rate, with an hourly output of 6-7 tons, which is consistent with the capacity indicators. Thanks to the efforts of Hongcheng's engineering and installation team, we have been put into operation on schedule. The data shows that the operating indicators of mechanical equipment are normal.

We are a building decoration material factory, and have purchased the limestone vertical mill equipment of HCM and put it into production! The model of vertical limestone mill is HLM1500 vertical mill, which is used to process limestone for building materials. It produces 200 meshes of stone powder, with a passing rate of D90 and a mechanical capacity of 23 to 27 tons/hour.