Nika fgd gyps foda

Gabatarwa zuwa Gypsum Gypsum

An nuna girmamawa ga Gypum saboda wakili na gama gari. Gypsum Cikakken Samfurin Samfurin Samfuron Gypur ya samu ta hanyar masana'antar mai da aka kore ta, ba wai kawai tare da duk wasan kwaikwayon na ƙasa ba, har ma da alamar ma ta yi yawa;

Aikace-aikacen FGD Gypsum

Desulfuritization gypsum foda da gypsum foda yana da manyan bambance-bambance a kan bangaren ta jiki, sodium carbonate ya ƙunshi adadin aikace-aikacen, sodium carbonate yana da yawa, da kuma desulfurized gypsum fodaHLMX Ultlafine niƙaZa a iya amfani da shi a cikin filayen da yawa kamar gini, kayan gini, ƙimar ƙwayoyin cuta, da sauransu, kayan sarrafawa, abubuwa masu guba, da sauran abubuwa, abubuwa masu lalacewa, tsayayye da sauran halaye.

Yankin Noma:

1. Inganta yumɓu ko yashi ƙasa zuwa ƙasa mai laushi, don inganta tsarinta da halaye na magudanar.

2. Kyakkyawan tushen alli da sulfur don gyada, wake, dankali horar da dasa ya dace da kyakkyawan tushen alli;

3. Don daidaita ƙimar ƙasa na ƙasa da haɓaka ƙarfin musayar ta wacce ke da mahimmanci mahimmancin aikace-aikace;

4. Samun damar samar da abubuwa masu amfani;

5. Zai iya inganta samar da nodule; Inganta canjin nitrogen na nitrogen;

6an mahimmin ma'auni don kula da cututtukan amfanin gona.

Binciko akan Motar Motar Mill

HTTPS://www.hongchechill.com/hlmx-psinFine-vertical-grinding-mill-production/

Ga masana'antar injin gypsum, hlm a tsayegypsum a tsayeKayan aikin milling mai haɓaka ne tare da halaye masu ƙarfi na babban nika, ƙarancin kaya, ƙarancin kaya, ƙarancin farashi, ƙarancin farashi, ƙarancin farashi, ƙarancin farashi mai tsayayye.

Tsari na gudana na fgd gypsum

Fgd gypsumfoda yin na'urarka zabi na tsarin

Na daga ƙasa zuwa samarollerMill:

Manyan kayan aikin sikelin da fitarwa na iya biyan manyan sikelin. Mill na tsaye yana da babban kwanciyar hankali. Rashin daidaito:Kudin saka hannun jari na kayan aiki.

Mataki na:CRushing na albarkatun kasa

BabbaFgd gypsumabu ne ya ragu da fallasa abinci (15mm - 10m) wanda zai iya shiga cikin niƙa niƙa.

DakaliII: Grulli

An murƙusheFgd gypsumAna aika kananan kayan zuwa wurin ajiyar ajiya ta mai lifta, sannan ya aika zuwa ɗakin niƙa na niƙa sosai da quite ta hanyar gudanarwa.

Mataki na III:Rarrabaing

Abubuwan da aka haƙa da aka mika da aka yi da aka yi da alama ta hanyar grading, da kuma ba a san foda ba ta hanyar mai rarrabewa kuma ya koma zuwa babban injin don re nika.

DakaliV: COlcurin da aka gama

Foda yana dacewa da ƙimar fells yana gudana ta bututun mai tare da gas kuma ya shiga ƙurar ƙura don rabuwa da tarin. An aika da tarin foda zuwa samfurin Silo da aka gama samfurin ta hanyar isar da na'urar ta hanyar tashar jirgin ruwa, sannan kuma ya kunshi mai ɗaukar hoto ko kuma mai ɗaukar hoto.